XBT NODE/01 / SETUP & VERIFICATION

Getting started.

From the box to your own view of the XBT network.

For shipped Node/01 systems · StartOS 0.4.1.x
Updated

01 / CONNECT

Open your node

Start with the local address handwritten on the insert in your box. The insert’s QR code opens this guide; it does not open your node.

From another computer Recommended

  1. Connect the node to a LAN port on your router or network switch with an Ethernet cable.
  2. Plug in the supplied power adapter and press the node’s power button.
  3. On a computer connected to the same home network, by Wi-Fi or Ethernet, enter the entire handwritten address in your browser’s address bar, including https://.
EXAMPLE ADDRESS ONLYhttps://xbtn-01-001.local

Use your own unit’s address from the insert. This example is for a unit labeled XBTN-01-001.

Directly on the node

Connect a monitor, keyboard, and mouse, then power on. StartOS opens on the monitor; no second computer is needed. Keep Ethernet connected for internet access, or, after signing in, join your home network under System → WiFi.

The node needs internet access to catch up with the XBT network. The Ethernet cable, monitor, keyboard, and mouse are not included.

02 / SIGN IN

Set your password

Choose your language and keyboard layout, then set and confirm your own password. Save it somewhere safe and finish setup. When the login screen appears, enter the password you just created.

Already chose Skip?

Use the factory password on your printed insert. Once signed in, go to System → Change Password and set your own.

Lost the insert? Request the factory password by email through SPECTRE WORKS support. The factory password does not override a password you set yourself.

03 / CATCH UP

Let the preinstalled services catch up

The network kept producing blocks while your node was in transit. Leave it powered and online. Bitcoin Knots catches up first; the services that read from it may lag behind.

Bitcoin Knots
Checks XBT blocks against the network rules and stores the blockchain on your node.
Fulcrum
Indexes the blockchain so wallets can look up transaction history.
Mempool
Gives you a block explorer in your browser, using data from your own node.

Open the installed Bitcoin Knots service to check sync status. A service catching up is not a reason to reinstall it or start a reindex.

04 / APP SOURCE

Choose the XBT registry

Marketplace opens on the Start9 registry by default. Before installing or updating an app that reads or writes XBT blockchain data, select SPECTRE WORKS. A BTC package can have the same app name and still follow a different chain.

  1. Open Marketplace.
  2. Open the registry selector and choose SPECTRE WORKS.
  3. Confirm that source before installing or updating an XBT app.

The registry is already listed and its package-signing key is already trusted on a shipped unit. You do not need to add a registry or approve a new key. If the entry is missing or an install asks you to trust an unfamiliar signer, stop and contact support.

App updates and StartOS updates are separate

For an app update, confirm the source is SPECTRE WORKS. Cancel an update that would switch an XBT app to the default BTC registry.

For a StartOS update, leave the OS update source unchanged and check each package provider’s compatibility notes for the proposed version. Our registry does not supply the operating system.

SPECTRE WORKS tracks XBT package releases published by our designated upstream registry and verifies artifact identity and integrity before publishing them. The original providers remain responsible for their releases; we do not author or independently audit each update. We do not set the providers’ release dates or StartOS’s update schedule.

Start9 documentation: App updates · StartOS updates

VERIFY / YOUR CHAIN

Don’t trust, verify

We preload the chain for convenience. We recommend validating it on your own node. A block comparison identifies the chain you are looking at. A reindex makes Bitcoin Knots process the stored blocks again.

Quick check: compare one XBT block

In your installed services, open Mempool → Open UI. Search for block height 961640, without a comma. Compare its block hash with the same height on a separately operated XBT node or XBT explorer.

XBT / BLOCK 961640 / BLAKE2b0000000000000050c1e5f69672f459293be14f46e5a494e7a8c8541396f18eeb

Compare all 64 characters, not just the height. Repeat on a recent block a few blocks behind the tip if you wish. A match shows the sources agree on that block; it does not mean your node has revalidated the preloaded history.

If hashes differ at height 961640, confirm both explorers are on XBT and showing the same height. If they still differ, do not rely on the node’s results yet. Contact support with the height and both hashes.

Validate locally: rebuild from the stored blocks

This is a deliberate verification step, separate from normal first-boot catch-up. Do it when you can leave the node powered on and do not need its services. Knots can take a long time to rebuild; Fulcrum and Mempool may be unavailable or show stale data until it finishes.

Back up any personal data before maintenance.

  1. Open the installed Bitcoin Knots service. You do not need Marketplace or a replacement package.
  2. In Actions, choose Reindex Blockchain, not Reindex Chainstate. Read the confirmation, then run it once. This rebuilds the block index and chain state from the first block using the archival block files already on the shipped Node/01. You do not need to erase the SSD. If you have since enabled pruning, missing block files must be downloaded again.
  3. Knots restarts if it was running. If it was stopped, start it. A success message means the reindex was requested, not that it has finished. Leave the node powered and connected. Watch sync progress on the service page instead of repeating the action.
  4. Once Knots is back at the current XBT height and dependent services have caught up, compare a recent confirmed block’s hash with a separate XBT source at the same height.

This checks chain data using the software you run; it does not authenticate the software itself.

XBT package: Reindex Blockchain implementation

Check the software on your node

Verifying the blockchain and verifying the software that processes it are different tasks. You can identify your installed applications, trace their packages to the original releases, and independently check the release artifacts.

  1. Identify the installed versions. In StartOS, open System → About this Server to check the operating-system version. Under Services, inspect the installed version of Bitcoin Knots, Fulcrum, Mempool, and any other apps. Keep the full XBT package flavor and revision when available (for example, #knots:29.4.3:1).
  2. Trace the release. In Marketplace, select the SPECTRE WORKS registry and look up the relevant package. The registry records each package's original GitHub Release URL and its cryptographic archive commitment. Those releases come from the respective software and packaging projects, not from a SPECTRE WORKS rebuild.
  3. Compare an independently downloaded package. On a separate computer with start-cli, query the registry's published metadata, then download the matching .s9pk from its original GitHub release. Inspect the local file's manifest and commitment and compare its package ID, complete version, rootSighash, and rootMaxsize against the registry entry. Choose the correct package and hardware variant if checking another application.

For example, to examine the Bitcoin Knots package with start-cli:

start-cli --registry https://startos-registry.spectreworks.io registry package get bitcoind full --format json
start-cli s9pk inspect ./bitcoind.s9pk manifest --format json
start-cli s9pk inspect ./bitcoind.s9pk commitment --format json

The second and third commands assume you downloaded the original release asset as bitcoind.s9pk into your current directory. The manifest and commitment should match the specific version and artifact shown in the registry output. See Start9's package-inspection command reference.

What this proves: a matching, verified commitment links the downloaded package to the release indexed by the registry; signature verification establishes that it was signed by the corresponding key. Neither proves the code is safe or that the software currently running in memory is unchanged. Stronger claims about running binaries require independent examination of the installed system or comparison with independently obtained builds. A system cannot conclusively attest to its own integrity if the system itself is compromised.

Our role: SPECTRE WORKS verifies and distributes packages from its designated upstream registry. Our additional distribution signature does not represent an independent code audit or certification of the providers' software.

HELP / COMMON QUESTIONS

When something doesn’t look right

The handwritten address won’t open

Check power, both ends of the Ethernet cable, and every digit in the address. Use your main home network, not guest Wi-Fi or mobile data. If your computer uses a VPN that blocks local devices, disconnect it briefly and retry.

A directly attached monitor is the fallback. No reinstallation or router port forwarding is needed.

Mempool opens but looks behind

Check Bitcoin Knots first. Let it finish catching up or reindexing, then check Fulcrum and Mempool. If progress has stopped or a service reports an error, contact support.

Include your unit label, order number, and the exact error. Never send your password or wallet recovery words.

NEXT / EXPLORE

Explore your first block

In StartOS, select the installed Mempool service and choose Open UI. Select the newest mined block, not a projected block. You can see its height, hash, and transactions.

This explorer is running on the Node/01 in front of you. You are reading your own node’s view of the network.

SPECTRE WORKS is independent from Bitcoin Knots and its developers. This guide does not imply affiliation or endorsement.